New Government Sticker Department

We all know how bad the Australian Government can be at times. We think what they need is a new department, one with integrity and and that can see the lighter side of stuff, it should be called Department of Stickers! This is how a country should be ruled!

Masking sticker for HQ One Tonner Ute

We made some masking stickers for a Spectron Panels, Underwood. The stickers were used to mask out the green that had been already painted onto the car. Once the mask was laid down, the top of the flame was masked and the bottom painted orange, then the bottom was masked out and the top was painted purple. Finally all masking  was removed and clear coats applied.

Acrylic Sign – Gibson Guitars

My favourite guitar brand is Gibson, so I decided to make this sign of their logo. I made it by reverse printing a sticker onto clear vinyl and back laminating with white vinyl, it was then applied to 4mm clear acrylic and laser cut, a piece of 4mm black acrylic was laser cut and attached to the back of the sign.
I now have access to a 2400mm x 1200mm laser cutter, if you require laser cutting work, please don’t hesitate to contact me.
Wayne

Custom Printed and Acrylic Gibson Guitar Sign

Gibson-guitar-sign-laser-cut-acrylic-printedThis is sign of my favourite guitar brand – Gibson, I made it by reverse printing a sticker onto clear vinyl and back laminating with white vinyl, it was then applied to 4mm clear acrylic and laser cut, a piece of 4mm black acrylic was laser cut and attached to the back of the sign.
I now have access to a 2400mm x 1200mm laser cutter, if you require laser cutting work, please don’t hesitate to contact me.
Wayne