Category: Lightboxes

Our customer wanted to give her husband an illuminated sign for his 40th birthday that he could hang in his bar. We came up with the concept and made the light box from scratch by laser cutting MDF, acrylic, custom cutting vinyl for the face and installing fluorescent lighting inside. It is a very effective sign and will look great in a bar once fitted. We can supply and fabricate your lightbox needs including internal and external, LED and Slimline. We can fabricate the face using lasercut/routered acrylic and can lasercut and router the face as required to create unique signage.

Carindale Radiology needed new signage and replacement signage for their shop in Carindale, Brisbane. We had to supply and replace the existing acrylic faced lightboxes, as well as produce a 2400mm x 1200mm full digital print with a ColorBond™ steel backing to go on a brick surface.

We also made interior signs with their new logos using artwork supplied by the customer. Each light-box is just over 5 metres, and all were produced using top grade vinyl.

Original light boxes that we replaced.

Brand new signage produced by stickerart.com.au.

Photographs taken throughout the production process.

Below are the main light box signs that we did for Central Park Shopping Centre in Algester, Brisbane, Queensland. The shopping centre opened a new medical complex and needed their existing logo on the light boxes. We had to copy the logo from a photo and convert it into vector artwork in order to cut the vinyl with our vinyl cutters. These light boxes are covered in a material called Flex-Face which is very easy to apply vinyl to. The vinyl we used was Avery® Translucent, which is great for light boxes. During the day it looks like typical vinyl, but at night the translucency gives a great effect and makes the signage very attractive. Translucent vinyl is much more expensive than standard vinyl, but the results are great and well worth the additional costs.